Status Transition Of Logical Unit - Fujitsu Scan Partner 300C Instruction Manual

4.8 Status Transition of Logical Unit

BUS DEVICE RESET message
INQUIRY command
Range protected in reserved status
NOT READY status
Time to READY
At room temperature
(25ºC): ≤ 30 seconds
At low temperature
(5ºC): ≤ 3 minutes
Normal status
C.A. status
REQUEST SENSE command
(Error detail reported/cleared)
Power ON
Reset
UNIT ATTENTION status
REQUEST SENSE command
UNIT ATTENTION reported/cleared
NOT READY status
REQUEST SENSE
COMMAND
(NOT READY reported)
READY status: Waiting
READ command
Reading under way
Scan completed
- Hardware error
- Abnormal command
- Abnormal parameter
- Medium error
C.A status
Other command
(C.A. status released)
Other command
Other command
Other command
4-59
GOOD status
CHECK CONDITION status
Status transition