Table of Contents
Advertisement
3.6 Document Setting Method
3.6.1 Flatbed
3.6.1.1
When the document size is of letter/A4 size or smaller
If the document is to be read on the flat-bed, following the steps below.
1.
Open the document cover.
2.
Put the document on the document glass with the image face down with the upper end to the left. Correct any curls
or folded documents.
3.
Position the left side and upper end of the document in line with the reference frame so that the upper-left comer of
the document coincides with the upper-left of the reference frame.
If the document is not set correctly, reading is not done correctly.
4.
Close the document cover slowly.
If the document cover is closed too quickly, the document may be moved. During reading, do not press or open the
document cover.
5.
Start the reading.
6.
After reading ends, open the document cover and remove the document.
Figure 3-6 Flatbed reading
3-10
Advertisement
Table of Contents
