Components - Fujitsu Scan Partner 300C Instruction Manual

1.2.2 Components

1. Document Cover
The document cover holds the document in place during scanning so that the document does not move.
2. Document glass
Place the document to be read on the document glass.
3. Automatic document feeder (ADF)
The automatic document feeder (ADF) feeds documents in the scanner automatically.
4. Paper tray extension
The extension prevents documents from bending.
5. Power switch
The power switch is used to turn the scanner on and off.
6. LED panel
The LED panel indicates the status of the scanner (Power, Ready, and Jam).
7. Input paper chute
The input paper chute stacks the documents to be fed by the ADF.
8. ADF open/close lever
The ADF open/close lever is used to open and close the ADF to remove paper jammed in the ADF.
9. Power connector
The power cable is connected to the power connector to supply the scanner with AC power.
10. SCSI interface connector
The interface is connected to the interface connector. The scanner is connected to the host system through
the interface cable.
1-4