Starting Warm Engine; Stopping Engine - Echo SRM - 311 Operator's Manual

20

STARTING WARM ENGINE

WARNING
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch
Move stop switch button (A) away from the STOP position.
2. Recoil Starter
Lay the trimmer on a flat clear area and pull the recoil starter handle
(D) until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.

STOPPING ENGINE

1. Release Throttle.
Allow engine to idle for a minute.
2. Stop Switch.
Move stop switch button backward to STOP position.
WARNING
If engine does not stop when stop switch is moved to "STOP"
position, move choke lever to closed "Cold Start" position to stall
engine. Have your ECHO dealer repair stop switch before using
trimmer again.
DANGER
DANGER
A
D
A