Grip Adjustment
1
Pull back the belt
.
Using as a Hand Strap
Remove the strap and loop it around your wrist.
While pressing A, pull B and remove the strap.
Press and hold
.
●
When attaching the hand strap, insert C until it clicks into place.
Inserting an SD card
■
GZ-MS250/GZ-MS230 (Models with Built-in Memory)
When a commercially available SD card is inserted, recordings can still be made to
the card without stopping when the remaining recording time on the built-in memory
runs out.
1
Close the LCD monitor.
(Base)
* Turn off the power of this unit
before inserting or removing a card.
.
2
Adjust the length
2
Open the cover.
3
Insert an SD card.
For more information, refer to the Detailed User Guide
3
Attach the belt
Label
http://manual.jvc.co.jp/index.html/
7