M.2 Solid-State Drive - Lenovo IdeaCentre 5i User Manual

10. Reinstall all removed parts.
11. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables
to the computer.
Note: If a locking device is available, use it to lock the computer.

M.2 solid-state drive

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Attention: To replace the Optane memory in the M.2 solid-state drive slot, go to
for details.
docs/tg_ssd
The following illustration shows the location of the M.2 solid-state drive on the system board.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
22
IdeaCentre 5i (14L, 6), IdeaCentre 5 (14L, 6) User Guide
https://support.lenovo.com/