• Power supply assembly
* for selected models
Remove or replace a CRU
This section provides instructions on how to remove or replace a CRU.
Power cord
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Note: Do not remove the power cord when the computer is connected to ac power. Otherwise, there might
be a risk of short circuits.
Replacement procedure
1. Turn off the computer and remove all connected peripheral devices and cables.
2. Remove the power cord.
3. Connect the new power cord to the computer.
14
IdeaCentre 5i (14L, 6), IdeaCentre 5 (14L, 6) User Guide