Finishing The Installation - Aire Magnitude 34348 Instruction Manual Warranty Certificate

FINISHING THE INSTALLATION

STANDARD CEILING MOUNTING
WARNING: Locking slots of ceiling canopy are provided only as an aid to mounting. Do not leave fan assembly
unattended until all four canopy screws are engaged and firmly tightened.
Step 1. Slide canopy up to the ceiling as shown in Figure 21. Make sure you place the wires safely into the outlet box.
Step 2. Secure the canopy to the mounting bracket with the four screws with your fan. Slide the canopy ring over the
canopy and tighten by turning the canopy ring.
CLOSE-TO-CEILING MOUNTING
WARNING: Make sure the tab on the mounting bracket properly sits in the groove in the hanger ball before attaching
the canopy to the bracket by turning the housing until it drops into place.
Step 1. Remove the fan from the hook on the mounting bracket.
Step 2. Secure the canopy to the mounting bracket with four screws included with your fan. (Fig. 22) Slide the canopy
ring over the canopy and tighten by turning the canopy ring.
OUTLET BOX
CEILING
MOUNTING
BRACKET
FIG. 21
OUTLET BOX
SCREWS
CEILING
MOUNTING
BRACKET
CANOPY
CANOPY
RING
FIG. 22
11
SCREWS
CANOPY
CANOPY
RING