Adding And Removing Sodimms - Extreme Networks BlackDiamond 6800 Hardware Installation Manual

Warning: Avoid personal injury. Keep hands away from rotating fan blades.
4 Insert the new fan tray into the bay.
5 Tighten the fan tray using the screws you removed in Step 1.
A
DDING AND
To add a SODIMM to the MSM64i, follow these steps:
1 Prior to removing or installing SODIMMs on the MSM64i, put on the ESD wrist
strap that is provided with the chassis, and connect the metal end to the ground
receptacle located on the top-left corner of the BlackDiamond 6800 switch front
panel.
2 Locate the SODIMM sockets on the MSM64i.
3 Position the SODIMM in the socket by ensuring that the gold fingers of the
SODIMM slip into the connector and the keying notches align.
4 Secure the SODIMM by pressing down firmly until the SODIMM is locked into the
socket and the ejector locks rotate into position, as shown in
B D S H
LACK IAMOND WITCH ARDWARE
R
EMOVING
I G
NSTALLATION UIDE
SODIMM
S
A R SODIMM
DDING AND EMOVING
Figure 3-3.
S
3-5