Table of Contents
Advertisement
S
M
ERVICE AND
AINTENANCE
Caution: Ensure the latch covers the AC power connector. The power supply
cannot be removed or installed unless the connector is covered.
7 Make sure that the replacement power supply is right-side up as described by the
text on the front of the power supply, that the ejector/injector lever is open, and that
the safety latch covers the AC power connector.
8 Use the centrally mounted handle to slide the power supply into the bay. Use the
ejector/injector lever to engage/disengage the power supply connectors during the
last inch of insertion into the chassis.
Caution: Do not slam the power supply into the backplane. This will cause
damage and possibly require the return of the chassis.
9 Secure the power supply by tightening the screw on the ejector/injector lever using
a #2 Phillips-head screwdriver.
10 Slide the locking latch covering the AC power connector to the right until it locks
into the chassis.
3-6
A
3800 S
S
H
LPINE
ERIES
WITCH
ARDWARE
I
G
NSTALLATION
UIDE
Advertisement
Table of Contents
Related Manuals for Extreme Networks Alpine 3800 FM-24MFi
Related Products for Extreme Networks Alpine 3800 FM-24MFi
- Extreme Networks Summit 300-24
- Extreme Networks Summit 300-48
- Extreme Networks Summit 300
- Extreme Networks Extreme Switching ERS 3510GT-PWR+
- Extreme Networks Extreme Switching ERS 3549GTS
- Extreme Networks Extreme Switching ERS 3549GTS-PWR+
- Extreme Networks Extreme Switching ERS 3550T-PWR+
- Extreme Networks ExtremeSwitching ERS 3626GTS
- Extreme Networks ExtremeSwitching ERS 3626GTS-PWR+
- Extreme Networks ExtremeSwitching ERS 3650GTS
- Extreme Networks ExtremeSwitching ERS 3650GTS-PWR+
- Extreme Networks Altitude 300-2
- Extreme Networks Altitude 3500 Series
- Extreme Networks Altitude 3510
- Extreme ERS 3526T-PWR+
- Extreme Networks Ridgeline 3.0