Using Color Coded Scales - RIDGID R4550 Operator's Manual

USING COLOR CODED SCALES

Each corresponding scale should be used to measure the distance
between the inside face of the blade to the inside face of the
fence.
BLACK TAB
The black tabs correspond to the black scale with white numbers.
1.
The black tabs in the middle of the rail can be used for
right rip cut 0 inches to 21 inches.
2.
To use the black scale with white numbers, insert the fence
notches into the black tabs on the rail.
See Figure 43.
RIGHT ORANGE EXTENSION TAB
The right orange extension tabs correspond to the orange scale
with black numbers.
1.
The orange tabs on the right of the rail can be used for
right rip cut 21 inches to 32.5 inches.
2.
To use the orange scale with black numbers, insert the
fence notches into the right orange extension tabs on the
rail.
See Figure 44.
LEFT ORANGE EXTENSION TAB
The left orange extension tabs correspond to the black scale with
orange numbers.
1.
The orange tabs on the left of the rail can be used for left
rip cut 0 inches to 22 inches.
2.
To use the black scale with orange numbers, insert the
fence notches into the left orange extension tabs on the
rail.
See Figure 45.
MAKING ADJUSTMENTS
26
BLACK SCALE W/ BLACK SCALE W/
WHITE NUMBERS WHITE NUMBERS
CLEAR CLEAR
INDICATOR INDICATOR
Figure 43
ORANGE SCALE ORANGE SCALE
W/ BLACK NUMBERS W/ BLACK NUMBERS
ORANGE ORANGE
INDICATOR INDICATOR
Figure 44
BLACK SCALE BLACK SCALE
W/ ORANGE NUMBERS W/ ORANGE NUMBERS
CLEAR CLEAR
INDICATOR INDICATOR
Figure 45