Clock; Fuel Gauge; Fuel Warning Indicator; Low Battery Voltage-Warning Indicator - Yamaha F225 Owner's Manual

Basic components
EMU26700

Clock

Press the " " (mode) button repeatedly
until the indicator on the face of the gauge
points to " " (time). To set the clock, be
sure the gauge is in the "
Press the " " (set) button; the hour display
will begin blinking. Press the "
button until the desired hour is displayed.
Press the " " (set) button again, the minute
display will begin blinking. Press the "
(mode) button until the desired minute is dis-
played. Press the "
start the clock.
NOTE:
The clock operates on battery power. Discon-
necting the battery will stop the clock. Reset
the clock after connecting the battery.
EMU26711

Fuel gauge

Eight segments indicate the fuel level. When
all segments are showing, the fuel tank is full.
ECM00860
CAUTION:
The Yamaha fuel tank sensor differs from
conventional sensors. Incorrectly setting
the selector switch on the gauge will give
false readings. Consult your Yamaha deal-
er on how to correctly set the selector
switch.
28
" (time) mode.
" (mode)
" (set) button again to
NOTE:
The fuel level reading can be affected by the
position of the sensor in the fuel tank and the
attitude of the boat in the water. Operation
with bow-up trim or continuous turning can
give false readings.
"
EMU26720

Fuel warning indicator

If the fuel level decreases to one segment, the
fuel level warning segment will begin to blink.
ECM00880
CAUTION:
Do not continue to operate the engine with
full throttle if a warning device has activat-
ed. Get back to the port within trolling en-
gine speed.
1. Fuel level warning segment
EMU26731

Low battery voltage-warning indicator

If battery voltage drops, the display will auto-
matically turn on and begin to blink.
ZMU01745