What Happens If Something Goes Wrong - Electrolux EOB 395 Instruction Booklet

Replacing the Oven Light
Ensure the electricity supply is switched off
before carrying out this operation.
The oven bulb has to comply to these features:
a) resistant to temperatures of 300 °C;
b) electric rate: 230 V - 50 Hz;
c) electric power rate: 15 W.;
d) connection type: E 14.
To replace the bulb, proceed as follows:
(fig. 8)
a) push in and turn the glass lid anticlockwise;
b) remove tha faulty bulb;
c) replace it with a new one;
d) refit the glass lid;
e) switch on the electricity supply.

6. What happens if something goes wrong

If the appliance is not working correctly, please carry out the following checks, before contacting your local
Electrolux Service Centre.
SYMPTOM
n The oven does not come on
n The oven temperature light does not come on
n The oven light does not come on
n It takes too much time to finish the dishes, or they are
cooked too fast.
n Steam and condensation settle on the food and the oven
cavity.
22
All manuals and user guides at all-guides.com
uCheck the oven is in manual operation and that both a cooking
uCheck the appliance is wired in properly, and the socket
uTurn the thermostat knob on a temperature
uTurn the oven function control knob on a function.
uTurn the oven function control knob on a function
uBuy a new oven light bulb, asking for it to your local Electrolux
uRefer to the contents of this booklet, especially to the chapter
uLeave dishes inside the oven no longer than 15-20 minutes
FO 0287
SOLUTION
function and a temperature have been selected
or
switch or the switch from the mains supply to the oven are
ON.
or
or
Service Centre and replace it by following the instruction
provided in this booklet.
"Using the Oven".
after the cooking is completed.
Fig. 8