Air to Water Heat Pump (Split integrated DHW type)
4 .4
Thermal insulation
Install the thermal insulation kit on the metal parts to
avoid the inconvenient effects of condensation.
• 1 - Install the straight insulating sleeves on the
exchanger's heating fittings.
• 2 - Install the conical insulating sleeves on the
exchanger's refrigerant fittings.
• 3 - Place the insulating adhesive tape on all the piping
fittings.
1
figure 29 - Thermal insulation
- 28 -
2
Installation and operating manual "1768 - EN"