Load Paper - Canon imageCLASS MF6500 Series Starter Manual

Load Paper

1
Pull out the paper cassette until it stops.
Connect Telephone Cables (MF6550 Only)
B
A
Connect the supplied telephone cable to the line jack (A) and the wall jack.
Connect your external telephone to the external device jack (B) if required.
5
2
Even the edges of the paper stack.
3
A
B
C
B
Load the paper stack print side up.
NOTE
Make sure the back edge of the paper stack touches
the rear paper end guide (C), the paper stack should
not exceed the load limit mark (A), and the load is
under the hooks (B) on the paper guides.
4
Gently insert the paper cassette as far as it will
go.
CAUTION
Be careful not to get your fingers caught.
NOTE
For loading paper in the multi-purpose tray, see
Chapter 3, "Print Media," in the Basic Guide.
6