Remote Control; Battery Installation; Functions Of The Remote Control Buttons - Kenwood DNX695S Instruction Manual

Remote control

This unit can be operated using the remote
control KNA-RCDV331 (optional accessory).
# CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.
A dangerous situation could result, if the
remote control falls down and gets wedged
under the pedals while driving.
• Do not leave the battery near fire or under
direct sunlight. A fire, explosion or excessive
heat generation may result.
• Do not recharge, short, break up or heat the
battery or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled
fluid comes in contact with your eyes or on
clothing, immediately rinse with water and
consult a physician.
• Place the battery out of reach of children. In
the unlikely event that a child swallows the
battery, immediately consult a physician.

Battery Installation

If the remote control operates only over
shorter distances or does not operate at all, it
is possible that the batteries are depleted.
In such instances, replace the both batteries
with new ones.
1
Insert two "AAA"/"R03"-size batteries
with the and poles aligned properly,
following the illustration inside the case.
Functions of the Remote
control Buttons
Ñ
Switch the operation mode
The functions operated from the remote
control differ depending on the position of the
mode switch.
AUD mode
■
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode
■
Switch to this mode when playing a disc
media including DVD, VCD, and CD.
NAV mode
■
Switch to this mode when controlling
navigation function.
TV mode
■
Not used.
NOTE
• When controlling a player that is not integrated in
the unit, select "AUD" mode.
Remote control
AUD
DVD
T V
NAV
85
English