Setting Up
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each item as follows.
■
[Beep]
Turns the key touch tone on or off.
Default is "ON".
[Parking Assist Display]
■
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels.
This can be set when the iDataLink
(commercially available) is connected.
[Parking Assist Position]
■
Select where information about obstacles is
displayed on the screen (left or right).
"Left"/ "Right" (Default)
This can be set when the iDataLink
(commercially available) is connected.
[Language Select Mode]
■
Selects the mode to select a language.
[Easy] (Default): Selects a language easily.
[Advanced]: Allows you to select languages
for respective items.*
[Language Select]
■
Selects a language.
[Touch Panel Adjust]
■
Adjust the sensing position of touch panel.
(P.74)
■
[Clock]
[NAV-SYNC ](Default): Synchronizes the clock
time with navigation GPS data.
[Manual]: Sets the clock manually
[Time Zone]
■
If you have selected [Manual] for Clock,
select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.74)
74
* If you select [Advanced] for Language
Select Mode, the following screen
appears.
[GUI Language Select]
■
Selects the display language used for the
control screen and so forth.
[Navigation Language Select]
■
Selects the language used for navigation.
Ñ
Adjust the date and time
manually.
1
Touch [Clock] in the User Interface screen.
2
Select [Manual].
3
Touch [Time Zone] in the User Interface
screen.
4
Select the time zone.
5
Touch [Clock Adjust] in the User Interface
screen.
6
Adjust the date, then adjust the time.
7
Touch [Set].
Ñ
Touch panel adjustment
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears.
h