Table of Contents
Advertisement
User's Guide
3. Load the envelopes into the input tray facing down making sure that the opened edge (flap side) of the
envelope is facing to the side. For envelopes with the opened edge (flap side) on the shorter side, you can load
the envelope with the opened edge (flap side) facing up.
Slide the envelopes into the ADF until they meet resistance.
Important:
c
Do not load envelopes with adhesives on them.
Note:
❏ Envelopes that are not opened by cutting sharply at the flap edge may not be scanned correctly.
❏ Envelopes that have not yet been sealed can be loaded with the flap open and facing up.
4. Slide the edge guides to fit the edge of the envelopes making sure there are no gaps between the envelopes and
the edge guides. Otherwise, the envelopes may be fed skewed.
Specifications of Originals and Placing Originals
46
Advertisement
Table of Contents
