Irregular Shaped Originals - Epson B11B248401 User Manual

User's Guide
Note:
❏ You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times.
❏ To scan both sizes and stitch them together, select Double-Sided from Scanning Side and select Left & Right from
Stitch Images in Epson Scan 2. See the Epson Scan 2 help for details.
❏ When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically
scanned by applying Paper Skew in the Correct Document Skew setting.
❏ The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm long. Otherwise, the length of the scanned image may be longer than intended as the scanner
scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in Epson Scan 2.
❏ Only use the Carrier Sheet designed for your scanner. The Carrier Sheet is automatically recognized by the scanner
by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered.
Related Information
"Carrier Sheet Codes" on page 16
&
"Required Settings for Special Originals in Epson Scan 2" on page 53
&

Irregular Shaped Originals

Specifications of Irregular Shaped Originals
By using the Carrier Sheet sold separately, you can scan originals that are wrinkled, curled, very thin, or irregularly
shaped.
Size
Up to A4
Specifications of Originals and Placing Originals
Thickness
0.3 mm (0.012 in.) or less
(excluding the thickness of the Carrier
Sheet)
38
Loading Capacity of the Carrier
Sheet
10 sheets