Table of Contents
Advertisement
GETTING STARTED
[AUDIO CONTROL]
[SWITCH PREOUT] (For
)
[REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier). (Page 17)
[SP SELECT]
[OFF]/5/4/6×9/6/OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
[TUNER SETTING]
[PRESET TYPE]
[NORMAL]: Memorizes one station for each preset button in each band
(page 6). ; [MIX]: Memorizes one station for each preset button,
regardless of the selected band.
[SYSTEM]
[KEY BEEP]
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[TDF ALARM]
(For
)
[ON]: Activates the alarm if you forget to detach the faceplate when ACC is set to
OFF. ; [OFF]: Deactivates.
[SOURCE SELECT]
[BUILT-IN AUX]
[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 9)
[P-OFF WAIT]
(For
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ;
[– – –]: Cancels
)
Default: [XX]
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[CLOCK]
[CLOCK DISPLAY]
[ENGLISH]
[РУССКИЙ]*
[TURKCE]
[ESPANOL]*
[YES]: Starts upgrading the firmware. ;
[NO]: Cancels (upgrading is not activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
[ON]: The clock time is shown on the display even when the unit is
turned off. ; [OFF]: Cancels.
Select the display language for [FUNCTION] menu and music
information if applicable.
By default, [ENGLISH] is selected.
* Selectable only for
.
5
ENGLISH
Hide quick links:
Advertisement
Table of Contents
