Table of Contents
Advertisement
REFERENCES
About Android device
• This unit supports Android OS 4.1 and above.
• Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
(AOA) 2.0.
• If the Android device supports both mass storage class device and AOA 2.0, this unit always
playback via AOA 2.0 as priority.
Change the display information
Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO INFO", or other information
(eg. station name) appears or display will be blank.
Source name
Display information: Main display
STANDBY
Source name/Clock
RADIO
Source name/Clock
For FM Radio Data System stations only:
Source name/Clock
Radio text+
Radio text+ song title/Radio text+ artist
Clock
back to the beginning
USB
For MP3/WMA/WAV/FLAC files:
Source name/Clock
File name
Playing time
ANDROID
Source name/Clock
AUX
Source name/Clock
Main display
Clock
back to the beginning
Frequency
Clock
back to the beginning
Station name/Program type
Radio text
Frequency
Song title/Artist
Album title/Artist
Folder name
Clock
back to the beginning
Clock
back to the beginning
Clock
back to the beginning
TROUBLESHOOTING
Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
Source cannot be selected.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
Correct characters are not
displayed.
• Radio reception is poor.
• Static noise while listening to
the radio.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"READING" keeps flashing.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 5)
Clean the connectors. (Page 12)
Reset the unit. (Page 3)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 5), some characters may not be displayed
correctly.
Connect the antenna firmly.
The playback order is determined by the order in
which file name were recorded (USB).
This depends on the recording process earlier (USB).
• Do not use too many hierarchical levels and folders.
• Reattach the device (USB).
ENGLISH
13
Hide quick links:
Advertisement
Table of Contents
