Advertisement
Quick Links
FLI-CH(RS)-CH5-[FLRSCH5]-EN
TERMS OF USE: Automotive Data Solutions Inc. ("ADS") products are strictly intended for installation by
Certified Technicians who are employed by a registered business specialized in the installation of auto-
motive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle,
it is the Certified Technician's responsibility to review the most current Product Guide, Install Guide
and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever,
including but not limited to any consequential damages, incidental damages, damages for loss of time,
loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or
may not have resulted from the use, misuse, improper installation or operation of its products. ADS
reserves itself the right to suspend any Weblink® account without notice and decline to offer technical
support to non-Certified Technicians, non-compliant Certified Technicians or end users.
Patent No. US 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2020
INSTALL GUIDE
DOCUMENT NUMBER
71822
REVISION DATE
20201005
FIRMWARE
FLI-CH(RS)-CH5-[FLRSCH5]
HARDWARE
FLRSCH5
ACCESSORIES
FLPROG (REQUIRED)
FLRF1/2/4 (OPTIONAL)
CARLINK ASCL2 (OPTIONAL)
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
www.flashlogic.com
Advertisement
Related Manuals for ADS FLASHLOGIC FLI-CHRS-CH5-FLRSCH5
Summary of Contents for ADS FLASHLOGIC FLI-CHRS-CH5-FLRSCH5
- Page 1 ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
- Page 2 PAGE 2 OF 24 VEHICLE LIST - 1 OF 1 • 20201005 DOC.: #71822 FEATURES WARNING I Install Type 1 requires a T-harness manufactured before 2013/11/04 Install Type 3 requires a T-harness manufactured after 2013/11/05 200 AT 11-14 2 • •...
- Page 3 PAGE 3 OF 24 BOX CONTENTS - 1 OF 1 • 20201005 DOC.: #71822 BOX CONTENTS MODULE T-HARNESS 1 10 PIN CONNECTOR LED 2 PROGRAMMING BUTTON LED 1 BLUE 12 PIN CONNECTOR BLACK RF PORT/ WEBLINK PORT BLUE BLACK TELEMATIC PORT AFTERMARKET HOOD SWITCH AND CABLE BLACK...
- Page 4 PAGE 4 OF 24 COMPATIBLE ACCESSORIES - 1 OF 1 • 20201005 DOC.: #71822 RF KIT (accessories sold separately) FLRF1/2/4 RF KIT (NC) MODULE RF PORT ANTENNA TELEMATIC KIT (accessories sold separately) FLHRNTM CARLINK MODULE TELEMATIC PORT (NC) TELEMATIC KIT (accessories sold separately) FLHRNTM PN 4120260 CAR CONNECTION...
- Page 5 PAGE 5 OF 24 TYPE 1 - WIRE CHART - 1 OF 1 • 20201005 DOC.: #71822 Control Black 5 pin Violet/Brown (MUX) Ignition switch Starter Black 5 pin Pink/DkGreen Ignition switch 300/300C 05-07 Parking Light* White/Purple Passenger kick panel Driver Door Pin Purple Driver kick panel...
- Page 6 PAGE 6 OF 24 TYPE 1 - WIRING DIAGRAM - 1 OF 2 • 20201005 DOC.: #71822 IGNITION SWITCH WARNING THIS WIRING DIAGRAM IS APPLICABLE ONLY IF THE REVISION DATE RF PORT/WEBLINK PORT 1: SKIM CONNECTOR OF THE T-HARNESS IS BEFORE: TELEMATIC PORT 2013/11/04 CUT AND INSULATE...
- Page 7 PAGE 7 OF 24 TYPE 1 - WIRING DIAGRAM - 2 OF 2 • 20201005 DOC.: #71822 NOTE 1 NOTE 2 STEP 1: STEP 1: -REMOVE THE WHITE/GREEN WIRE FROM THE BLUE CONNECTOR CAREFULLY. -IDENTIFY THE PINK (PIN 17) AND RED (PIN 19) WIRES FROM THE 20 PIN BLACK CONNECTOR OF THE T HARNESS. -USE A UTILITY KNIFE TO PUSH GENTLY AGAINST THE LOCKING TAB.
- Page 8 PAGE 8 OF 24 TYPE 2 - WIRE CHART - 1 OF 3 • 20201005 DOC.: #71822 Starter 11-14 Parking Light* White/Purple Driver kick panel Driver Door Pin Purple Driver kick panel Hood Status Purple/LtBlue Switch Starter Parking Light Pink/Red (MUX) Switch Aspen...
- Page 9 PAGE 9 OF 24 TYPE 2 - WIRE CHART - 2 OF 3 • 20201005 DOC.: #71822 Starter Ram 1500 07-09 Parking Light White/Green (MUX) Switch Driver Door Pin Purple Driver kick panel Hood Status Purple/LtBlue Switch Starter Parking Light White/Green (MUX) Switch...
- Page 10 PAGE 10 OF 24 TYPE 2 - WIRE CHART - 3 OF 3 • 20201005 DOC.: #71822 Starter Patriot 07-17 Parking Light* White/Purple Driver kick panel Driver Door Pin Purple/Blue Driver kick panel Hood Status Starter Wrangler Parking Light* White/Purple + White/Orange (+) Passenger kick pad 07-18 JK STD Key AT...
- Page 11 PAGE 11 OF 24 TYPE 2 - WIRING DIAGRAM - 1 OF 1 • 20201005 DOC.: #71822 VEHICLE IGNITION SWITCH RF PORT/WEBLINK PORT 1: SKIM CONNECTOR TELEMATIC PORT 1: SKIM HARNESS WHITE/YELLOW (NC) PURPLE (NC) IF VEHICLE IS EQUIPPED WITH PARKING LIGHT ( IF VEHICLE IS EQUIPPED WITH PARKING LIGHT (MUX) PARKING LIGHT (MUX) WHITE/BROWN...
- Page 12 PAGE 12 OF 24 TYPE 3 - WIRE CHART - 1 OF 1 • 20201005 DOC.: #71822 Control Black 5 pin Violet/Brown (MUX) Ignition switch Starter Black 5 pin Pink/DkGreen Ignition switch 300/300C 05-07 Parking Light* White/Purple Passenger kick panel Driver Door Pin Purple Driver kick panel...
- Page 13 PAGE 13 OF 24 TYPE 3 - WIRING DIAGRAM - 1 OF 1 • 20201005 DOC.: #71822 IGNITION SWITCH WARNING THIS WIRING DIAGRAM IS APPLICABLE ONLY IF THE REVISION DATE RF PORT/WEBLINK PORT 1: SKIM CONNECTOR OF THE T-HARNESS IS AFTER: TELEMATIC PORT 2013/11/05 CUT AND INSULATE...
- Page 14 PAGE 14 OF 24 MODULE PROGRAMMING PROCEDURE - STD KEY - 1 OF 1 • 20201005 DOC.: #71822 Close driver door. Turn key to OFF position. START Re-open driver door to wake up data bus. Remove key. START Insert key into ignition. Press UNLOCK on the OEM remote.
- Page 15 PAGE 15 OF 24 VALET MODE PROGRAMMING PROCEDURE - 1 OF 1 • 20201005 DOC.: #71822 >> >> NOTE: In Valet Mode, the Remote starter is not To exit valet mode: repeat steps 1 to 5. functional. Keyless entry, Lock and Unlock will remain functional.
- Page 16 PAGE 16 OF 24 AFTERMARKET REMOTE PROGRAMMING PROCEDURE - 1 OF 1 • 20201005 DOC.: #71822 >> WARNING: Program aftermarket remotes LED 1 will fl ash GREEN once [1x]. before usage. A maximum of four [4x] aftermarket remotes per system. Time restriction.
- Page 17 PAGE 17 OF 24 MODULE NAVIGATION PROCEDURE - 1 OF 1 • 20201005 DOC.: #71822 >> It is mandatory to exit the Module Navigation TO ACCESS THE OPTIONS: Press and hold To save and return to the OPTIONS: Press and at the end of this procedure.
- Page 18 PAGE 18 OF 24 MODULE NAVIGATION CHART - 1 OF 2 • 20201005 DOC.: #71822 MODULE NAVIGATION CHART: NOTES I Default settings are listed in bold. DISARM/UNLOCK BEFORE START II Make sure the option is covered on the vehicle before attempting to change the setting.
- Page 19 PAGE 19 OF 24 MODULE NAVIGATION CHART - 2 OF 2 • 20201005 DOC.: #71822 MODULE NAVIGATION CHART: NOTES DOUBLE LOCK LOCK + UNLOCK HORN EVENT TRIGGER LOCK + UNLOCK + START CONFIGURATION DOUBLE LOCK + START 30 mSEC HORN CHIRPS WIDTH 15 mSec 60 mSec 02-07 Technical Support only...
- Page 20 PAGE 20 OF 24 REMOTE STARTER ERROR CODES - 1 OF 1 • 20201005 DOC.: #71822 REMOTE STARTER ERROR CODES: NOTES Engine running. I WARNING: The following applies only when the parking lights are connected and supported by the system. Key in ignition at ON position.
- Page 21 PAGE 21 OF 24 MODULE DIAGNOSTICS - 1 OF 1 • 20201005 DOC.: #71822 TEST MODULE Flashing RED Missing/wrong information from fi rmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. DURING PROGRAMMING Solid GREEN then OFF Module correctly programmed.
- Page 22 PAGE 22 OF 24 MODULE RESET PROCEDURE - 1 OF 1 • 20201005 DOC.: #71822 Disconnect all connectors from module except Reconnect all connectors. the BLACK 20-PIN connector. Disconnect the BLACK 20-PIN connector. Repeat programming procedure. >> PRESS AND HOLD the module’s programming Failure to follow procedure may result with a button while connecting the BLACK 20-PIN DTC or a CHECK ENGINE error message.
- Page 23 PAGE 23 OF 24 TAKEOVER PROCEDURE - STD KEY - 1 OF 1 • 20201005 DOC.: #71822 >> >> All vehicle doors must be closed and locked Failure to follow procedure will result in prior to remote start sequence. vehicle engine shutdown. Press unlock on OEM or aftermarket remote.
- Page 24 PAGE 24 OF 24 INSTALLATION CHECKLIST - 1 OF 1 • 20201005 DOC.: #71822 CHECKLIST WARNING: Vehicle engine will start many times. Test in a well ventilated area. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle. Question 7: Does the vehicle shut down? Close all vehicle doors, hood and trunk.