Description, Specifications, And Standard Equipment; Description; Specifications; Standard Equipment - RIDGID SeeSnake NanoReel Operator's Manual

gloves. Do not use damaged drain cleaning gloves.
Practice good hygiene. Use hot, soapy water to
wash hands and other body parts exposed to drain
contents after handling or using drain inspection
equipment. To prevent contamination from toxic or in-
fectious material, do not eat or smoke while operating
or handling drain inspection equipment.
The information supplied with this product cannot
cover all possible conditions and situations that may
occur, and should be used in conjunction with appro-
priate training, sound judgment, and good work prac-
tices. These factors cannot be built into the product,
but must be supplied by the operator.
The EC Declaration of Conformity (890-011-320.10) will
accompany this manual as a separate booklet when re-
quired.
Description, Specifications, and

Standard Equipment

Description

The nanoReel is a modern, portable SeeSnake diagnostic
reel and camera that has the flexibility and adaptability
to view small pipes, tubes, voids, and conduits. It
contains a unique, removable cable drum which makes
cleaning and replacing push cables convenient. Since
the nanoReel comes with a removable system cable, it
can be used with any SeeSnake camera control unit or
with the hand-held micro CA-300 inspection camera.
The nanoReel uses an advanced push cable design
and a proprietary small radius camera design which
allows camera inspection through pipes with very small
diameters, P-traps, and very small radius bends which
conventional inspection systems often cannot inspect.
When using the nanoReel with an appropriate SeeSnake
control unit, the operator can connect an external line
transmitter and use a standard locator to line-trace the
path of the nanoReel push cable in a pipe.
1.800.544.2843 www.calcert.com
15
10 20
5 25
0 30

Specifications

Table 1
SeeSnake nanoReel Specifications
Weight :
with micro CA-300
inspection camera
without micro CA-300
inspection camera
Dimensions:
Length
Depth
Height
Frame diameter
Camera specifications:
Length
Diameter
Sonde
Lighting
Resolution:
NTSC
PAL
Push cable:
Length
Diameter
Bend radius
Pipe capacity*
Operating environment:
Temperature
Storage temperature
Humidity
Waterproof depth
*
The nanoReel will traverse a 1 in [25 mm] straight
pipe, but its ability to go past 90-degree turns will
depend on the material and construction of individual
pipes and joints. Test the material you intend to
inspect to ensure the camera can pass through turns
successfully. Some fittings in small diameter joints will
allow passage of the camera in only one direction.
Standard Equipment
nanoReel
Operator's Manual
Instructional DVD
Ball Guides (two sizes)
sales@calcert.com
n a n o
TM
14.65 lb [6.6 kg]
9.15 lb [4.1 kg]
13.25 in [33.6 cm]
6.6 in [16.7 cm)
14.2 in [36 cm]
12.75 in [32 cm]
0.88 in [22.5 mm]
0.61 in [15.5 mm]
512 Hz
6 LEDs
6 × 4 pixels
768 × 576 pixels
82 ft [25 m]
0.25 in [6.3 mm]
1 in [25 mm]
1 in [25 mm]
32°F – 115°F
[0°C – 46°C]
−4°F – 158°F
[−20°C – 70°C]
5% – 95% RH
225 ft [70 m]
English – 5