Cleaning; Accessories; Transport And Storage - RIDGID SeeSnake NanoReel Operator's Manual

Figure 23 – Using a PVC Guide Tube
Use ribbed flexible conduit to fashion a flexible guide
tube similar to the PVC guide tube (See Figure 24).
Figure 24 – Using the Flexible Guide Tube

Cleaning

Maintain equipment in accordance with these pro-
cedures to reduce the risk of serious injury and
damage to the machine.
Disconnect the system cable from the CCU before
cleaning to reduce the risk of electrical shock.
Clean the micro CA-300 or CCU in accordance with
its operator's manual. Before cleaning the nanoReel,
remove the micro CA-300 from the display cradle. Do
not allow the micro CA-300 or CCU to get wet during
cleaning.
14 – English
1.800.544.2843
n a n o
TM
WARNING
www.calcert.com
15
10 20
5 25
0 30
Use a soft, damp cloth to wipe the nanoReel clean. Do
not use any solvents to clean the nanoReel. If desired,
use a disinfectant to clean the nanoReel.
The drum and cable may be removed and the interior
of the drum may be washed off with a hose or pressure
wash. Avoid hosing the contact board on the back of the
drum.

Accessories

WARNING
The following RIDGID products have been designed
to function with the nanoReel. Other accessories
suitable for use with other tools may become haz-
ardous when used with the nanoReel. To reduce
the risk of serious injury, only use accessories spe-
cifically designed and recommended for use with
the nanoReel.
nanoReel SlipRing Cartridge (Interconnect for
SeeSnake)
nanoReel SlipRing Cartridge (Interconnect for
micro CA-300)
RIDGID-SeekTech or NaviTrack Locators
RIDGID-SeekTech or NaviTrack Transmitters
RIDGID SeeSnake Camera Control Units
RIDGID micro CA-300
nanoReel Ball Guides
nanoReel Camera Head Guides

Transport and Storage

Keep the equipment indoors or well-covered in wet
weather. Store the machine in a locked area, out of the
reach of children and people unfamiliar with its operation.
This machine could cause serious injury in the hands
of untrained users. Do not expose to heavy shocks or
impacts during transport.
Store electrical devices in a dry place to reduce the risk
of electrical shock. Store in temperatures from −4°F to
158°F [−20°C to 70°C]. Store the unit away from heat
sources such as radiators, heat registers, stoves, and
other products (including amplifiers) that produce heat.
sales@calcert.com