Transmitter Gsm850/1900; General Instructions For Gsm 850 Tx Troubleshooting - Nokia RH-99 Service Manual

RH-99; RH-100; RH-105; RH-106
RF troubleshooting

Transmitter GSM850/1900

General instructions for GSM 850 TX troubleshooting

Steps
1. Apply a RF-cable to the RF-connector to allow the transmitted signal act as normal. RF-cable should be
connected to an attenuator at least 10dB before connected to the measurement equipment, otherwise
the PA may be damaged.
Phoenix and establish a connection to the phone with the data cable e.g. FBUS.
2. Start
3. Select File and Scan product.
4. Wait a while for the PC to read the information from the phone.
5. Select Testing and RF Controls.
6. Set the parameters as follows:
i Band: GSM 850
ii Active Unit: TX
iii TX Power Level: 5
iv TX Data Type: Random
Results
The setup should now look like this:
Issue 2 COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 5 –29