Hoover Ranger 5241 Manual page 15

Cleaning & Replacing the Roller Brush
1. Push the two locking
buttons as shown to
remove the brush cover.
NOTE: to reduce the build-up of hair wrap around the roller brush it is recommended to
clean the roller brush periodically by removing the roller brush and using the cleaning
brush and or scissors to cut away and remove hair wrapped around the roller brush.
Cleaning & Replacing the Side Brushes
1. Unscrew the side brushes
with the screwdriver
provided.
NOTE: it is recommended to replace filters every 6 months.
2. Remove the roller brush and clean with the cleaning brush
provided. Alternatively, the roller brush can be replaced if
required.
2. Clean the side brushes
ensuring that any hair wrap
is removed.
15.