Changing The Wireless Network Name And The Access Password; Restoring Default Settings - Huawei HG532 User Manual

5.3 Changing the Wireless Network Name and
the Access Password
To change the name and access password for the wireless network, do as
follows (taking the authentication type WPA-PSK/WPA2-PSK as an example):
Step 1 Log in to the Web-based configuration utility.
Step 2 In the navigation tree on the left, choose Basic > WLAN.
Step 3 Choose the WLAN page.
Step 4 Select Enable WLAN check box to enable the WLAN function.
Step 5 Enter a wireless network name in the SSID text box.
Step 6 Select WPA-PSK/WPA2-PSK from the Security drop-down combo
box.
Step 7 Enter an access password in the WPA pre-shared key text box.
Step 8 Keep the default settings of other parameters.
Step 9 Click Submit to save the settings.
Please keep in mind the wireless access password and encryption that you set.
When you add the computer and other wireless devices to the wireless local
area network of the HG532e, the computer will prompt you to enter the
wireless key. Users don't know the key wireless will not be able to access to
the HG532e wireless local area network.

5.4 Restoring Default Settings

After you restore the default settings, your customized data is lost.
Therefore, use this function with caution.
You can quickly restore the default settings of the HG532e by pressing the
Reset button on the rear panel. To restore the default settings, press and hold
the Reset button for over six seconds after the HG532e is powered on, and
then release the button. In addition, you can restore the default settings of the
HG532e through the Web-based configuration utility. To restore the default
settings through the Web-based configuration utility, do as follows:
Step 1 Log in to the Web-based configuration utility.
Step 2 In the navigation tree on the left, choose Maintenance > Device.
Step 3 Choose the Reset page.
Step 4 Click the Restore Default Settings.
18