Important Safety Instructions; Handling - Canon RP10 User Manual

Important Safety Instructions

Handling

WARNING
Never install and operate the printer near flammable substances,
such as alcohol, paint thinner, benzene, or any other type of volatile
solution.
The machine must be connected to a socket-outlet with grounding
connection by the provided power cord.
Never damage or modify the power cord, and never place heavy
objects on the power cord.
Always make sure that your hands are dry when you are handling
the power cord or power plug. Never grasp the power plug when
your hands are wet.
Never plug the printer into a multiplug power strip.
Never bundle, wrap, or tie the power cord around itself or another
object. Connect the power plug securely into the power outlet.
Use only the power cord provided with the printer.
Never attempt to disassemble or modify the printer.
Before you clean the printer, turn the power OFF and disconnect
the power cord from the power outlet.
To clean the printer's exterior, use a firmly wrung cloth, moistened
slightly with water. Never use any type of volatile solution, such as
alcohol, benzene or paint thinner.
If you hear strange sounds, detect smoke or abnormal heat, sense
vibration, or smell odd odors around the printer, turn OFF the
Power immediately and disconnect the power cord from the power
outlet. Contact your local authorized Canon dealer or service
representative to have the printer serviced.
Handle the printer with care. Avoid shock and vibration to the
printer caused by reckless handling. If you suspect the printer has
been accidentally damaged, turn OFF the Power immediately and
disconnect the power cord from the power outlet. Contact your
local authorized Canon dealer or service representative to have the
printer serviced.
Before you move the printer, always turn OFF the power and
disconnect the power cord from the power outlet.
CAUTION
To avoid damage to the printer, never place the printer on an
unstable or vibrating surface. The printer may tip or fall over,
causing injury.
Keep all liquids, beverages, or any type of liquid, and clips,
staples, necklaces, or other metal objects away from the printer. If
you accidentally spill liquid or drop a metal object into the printer,
turn OFF the power immediately and disconnect the power cord
from the power outlet. Contact your local authorized Canon dealer
or service representative to have the printer serviced.
Note that when using the printer in an environment where
temperature is low and humidity is high, condensation may form
inside the printer due to vapor emitted from paper during printing.
Printing while condensation is still forming inside the printer may
damage the thermal printhead. When condensation forms,
immediately turn OFF the printer and let the printer dry completely
before printing.
Make sure that foreign substances do not enter inside the paper
holder. Otherwise, this may result in incorrect operation and
malfunctions.
Never install the printer in dusty locations. Doing so may cause a
fire or electrical shock.
Do not place objects other than the Check Reader CR-150/CR-120
on the printer, as these objects may tip or fall over, and cause
injury.
When you remove the power cord, grip it by the power plug head.
Never attempt to disconnect the power cord from the power outlet
by pulling on the power cord. Doing so may damage or expose the
cord's internal wiring, and cause a fire or electrical shock.
Keep the area around the power outlet clear of all obstacles so you
can disconnect the power cord easily at all times.
Never spill water or volatile solutions (alcohol, benzene, paint
thinner) into the printer. Doing so may cause a fire or electrical
shock.
When the printer is not being used for a long period of time,
disconnect the power cord from the power outlet.
6