Loading Paper - Canon RP10 User Manual

Loading Paper

A
Connect the supplied power cord and press the Power
Button to turn ON the power.
NOTE
When you turn ON the power, the Status LED is lit green.
B
Push the Cover Open Lever down to open the Paper
Cover.
IMPORTANT
Be careful not to apply excessive force to the Paper Cover. Doing so may
result in malfunctions.
C
Load paper in the right direction in the printer.
D
Slightly pull the edge of paper, and then close the Paper
Cover while pulling the paper forward so that the paper
will not be loosened.
The Status LED is lit green, and the printer is ready to print.
IMPORTANT
• Make sure to close the Paper Cover completely by pushing the protrusion
in its center. If you push the edge of the Paper Cover, it becomes in a
semi-locked state and may not be able to feed paper.
• Load the paper so that when you close the Paper Cover, the paper is not
pressed against the paper output section or askew. Otherwise, the paper
may be fed at an angle and paper jams may occur.
13