Maintenance - DeWalt Klein Tools BAT20-LW Instruction Manual

Right angle impact wrench
Hide thumbs Also See for Klein Tools BAT20-LW:
Table of Contents

Advertisement

LIFT RING
The lift ring
areas. Securely fasten lifting device to the ring before
moving the tool. Follow all worksite rules.
for tethering or securing the tool to a person or object during use when elevated.
• Have your power tool serviced by a qualified repair person using only identical
• The charger and battery pack are NOT serviceable. To assure product safety and
IMPACT WRENCH: Blow dirt and dust out of all air vents with clean, dry air at least
once a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic materials used in these parts. Use a
cloth dampened only with water and mild soap. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
CHARGER:
before cleaning. Dirt and grease may be removed from the exterior of the charger
using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions.
Find Quality Products Online at:
OPERATING INSTRUCTIONS
• Material: The type of material and surface finish of the material will affect
fastening torque.
• Fastening time: Longer fastening time results in
increased fastening torque. Using a longer fastening
time than recommended could cause the fasteners
to become over-stressed, stripped or otherwise
damaged.
is for moving the tool into difficult to reach
H
WARNING: To reduce the risk of serious personal injury, DO NOT use the lift ring
replacement parts. This will ensure that the safety of the power tool is maintained.
Contact Klein Tools for authorized service centers.
reliability, repairs, maintenance and adjustments should be performed by a DeWALT
factory service center, a DeWALT authorized service center or other qualified service
personnel. Always use identical replacement parts.
WARNING: SHOCK HAZARD. Disconnect the charger from the AC outlet
GlobalTestSupply
www.

MAINTENANCE

CLEANING
H
.com
sales@GlobalTestSupply.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Klein tools bat20-lw1

Table of Contents