Table of Contents
Advertisement
Find Quality Products Online at:
OPERATING INSTRUCTIONS
INSERT SOCKET ACCESSORY
The insert socket accessory fits into the
large socket on the angle impact wrench.
• To install the socket, insert the socket and
press firmly on the end of the socket until
the socket clicks in place the socket is
firmly seated in the tool.
• To remove the socket, push the release button on the side
Remove the socket and release the button.
WARNING: To reduce the risk of serious personal injury, place the forward/reverse
button in the lock-off position or turn tool off and disconnect battery pack before
making any adjustments or removing/installing attachments or accessories. An
accidental start-up can cause injury.
WARNING: Use only impact-rated accessories. Non impact-rated accessories may
break and cause a hazardous condition. Inspect accessories prior to use to ensure
that it con tains no cracks.
CAUTION: Ensure fastener and/or system will withstand the level of torque generated
by the tool. Excessive torque may cause breakage and possible personal injury.
1. Place the accessory on the fastener head. Keep the tool pointed straight at the fastener.
2. Press switch to start operation. Release switch to stop operation. Always check
torque with a torque wrench, as the fastening torque is affected by many factors
including the following:
• Voltage: Low voltage, due to a nearly discharged battery, will reduce fastening
torque.
• Accessory size: Failure to use the correct accessory size will cause a reduction in
fastening torque.
• Bolt size: Larger bolt diameters generally require higher fastening torque.
Fastening torque will also vary according to length, grade, and torque coefficient.
• Bolt condition: Ensure that all threads are free of rust and other debris to allow
proper fastening torque.
GlobalTestSupply
www.
D
D
of the large socket.
.com
sales@GlobalTestSupply.com
Advertisement
Table of Contents
