Setting Up
2
Follow the instruction on the screen and
long touch the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Special Setup
You can setup Special parameters.
1
Press the [
] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP screen appears.
h
3
Touch [Special].
h Special screen appears.
h
4
Set each item as follows.
DEMO
■
Set the demonstration mode. Default is "ON".
Manual Power OFF
■
Assigns the function of the [
held.
AV OFF: Turns off the screen and audio.
Interrupts from incoming hands-free
calls, rear camera views and so on are
functional, though.
Complete OFF (Default): Switches off the
power. Interrupts are not functional.
SETUP Memory
■
Locks or unlocks the Audio SETUP Memory/
Recall/Clear.
Audio SETUP Memory
■
Memorizes the current audio setting.
74
].
2
Ñ
Check the software version of this unit.
1
2
] button when
1
2
3
• Fader/ Balance, Speaker / X'over, Equalizer
(User Preset, SW Level), Position/DTA,
Sound Effect (P.77)
Audio SETUP Recall
■
Recalls the memorized audio setting.
Audio SETUP Clear
■
Clears the AUDIO SETUP Memory and the
currently memorized audio setting.
Software Information
■
Check the software version of this unit.
(P.74)
Open Source Licenses
■
Displays the open source licenses.
Initialize
■
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Software Information
Touch [Software Information] in the
Special screen.
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Display Setup
Press the [
] button.
h Popup menu appears.
h
Touch [SETUP].
h SETUP screen appears.
h
Touch [Display].