Setup Menu Operations: 9 Data; Setting The Com Port (1 Com Port Setting) - Yaesu FTM-100DR/DE Operating Manual

Setup menu operations: 9 DATA

Setting the COM port (1 COM PORT SETTING)

Set the communication speed and functions when using the DATA jack on the rear panel
of the transceiver as the COM port.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [9 DATA], then press
3
Rotate the DIAL to select [1 COM PORT SETTING],
then press
The detail settings screen appears.
4
Rotate the DIAL to select [COM SPEED], then press
.
5
Rotate the DIAL to select the desired communication speed, then press
The setting switches as follows:
"4800 bps" → "9600 bps" → "19200 bps" → "38400 bps" → "57600 bps"
Tip
The default setting: 9600 bps
6
Rotate the DIAL to select [COM OUTPUT], then
press .
7
Rotate the DIAL to select the information you want to output.
"OFF" → "GPS OUT" → "PACKET" → "WAYPOINT"
OFF: Does not use the COM port output function (deactivate the function).
GPS OUT: Outputs the GPS data that the transceiver acquired.
PACKET: Outputs the AX.25 packet communication data received using the internal
modem function.
WAYPOINT: Outputs the beacon location information of other stations you can
acquire from the received APRS packet as WAYPOINT data.
Tip The default setting: OFF
for over one second.
.
.
.
143