Set Up The Remote Control - Epson PowerLite 77c Quick Setup Manual

2
Connect your video source
Connect the projector to a computer or video source using any of the available
connections shown below.
•
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
The projector connectors from highest to lowest quality are
Computer (Component Video), S-Video, and Video.
•
A computer cable is included. You can purchase optional video and
audio cables through Epson
•
You can connect up to 3 video devices and use the remote control to
switch between them.
S-Video
cable
(optional)
Y ou can also connect an external monitor (to watch the display
NOTE
on your computer monitor while watching the projection screen),
and a USB cable to use the remote control to change presentation
slides. See the User's Guide on your CD-ROM for instructions.
3

Set up the remote control

1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
The remote control is ready for use.
®
RCA video cable
(composite video)
(optional)
Audio ports
or an electronics store.
Component
video to
VGA cable
(optional)
Computer
cable
(included)
EPSON