Switching On The Hob; Setting The Power Level; Switching Off A Cooking Zone - Miele SmartLine CS 7612 Operating And Installation Instructions


Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.
Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.

Switching on the hob

 Touch the  sensor.
Other sensors will light up.
If no further entry is made, the hob will
switch itself off after a few seconds for
safety reasons.

Setting the power level

Permanent pan recognition is activ-
ated as standard (see "Programming").
When the hob is switched on and you
place a pan on one of the cooking
zones, all the sensors for that cooking
zone's numerical keybank will light up.
 Place a pan on the cooking zone you
want to use.
 Touch the appropriate number sensor
for the power level you want.

Switching off a cooking zone

 To switch off a cooking zone, touch
the 0 sensor for that cooking zone.
 To switch off the hob and all the
cooking zones, touch the  sensor.
Operation
25