6. To install a 2.5-inch storage drive into the conversion bracket, do the following:
a. Flex both sides of the bracket and align pins
holes in the new 2.5-inch storage drive.
b. Install the new 2.5-inch storage drive into the bracket. Do not touch the circuit board on the drive.
Figure 74. Installing the new 2.5-inch storage drive into the bracket
7. Ensure that the connectors on the storage drives are on the upper side. Slide the conversion bracket
with the new 2.5-inch storage drive into the storage drive bay until it snaps into position.
Figure 75. Installing the storage drive with conversion bracket into the storage drive bay
8. Connect the signal cable and the power cable to the new storage drive.
What to do next:
136
P520 Hardware Maintenance Manual
1
,
2
,
3
, and
4
on the bracket with the corresponding