Jensen JBS-210 User Manual page 14

IMPORTANT: Only use the
on the CD tray to close it after loading a CD. This could damage the internal mechanism
used for opening and closing the CD tray.
5. Press the PLAY/PAUSE
in display, the CD will start playing from first track.
6. Rotate the VOLUME knob on main unit or press the VOL+/- buttons on remote control to adjust
the desired volume level.
7. To pause playback, press the PLAY/PAUSE
track time will be paused and PAUSE indicator will show in display. To resume playing, press
the CD PLAY/PAUSE
8. You can choose to play your favorite track directly by pressing either the SKIP NEXT
Button or SKIP PREVIOUS
number selected.
9. To locate a particular section within a track, press and hold the
section is found. Release the button to continue playing your selection.
10. To stop playing, press the STOP
11. Turn off the JBS-210 when you finish listening.
SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the SKIP NEXT
the next track or go back to the beginning of the current track.
2. During playback, press and hold the
audible high speed playback.
DIFFERENT PLAY MODES (REMOTE CONTROL ONLY)
Press the PLAY MODE Button on remote control repeatedly to select different of play modes when
CD is playing.
When playing CD, the play modes are shown as below.
REPEAT 1 - the track being played and will repeat continuously. Repeat one icon "REP" shows in
display.
REPEAT ALL - all tracks will repeat continuously. Repeat All icon "REP ALL" shows in display.
RANDOM – the tracks in the disc will be played in random sequence. Random icon "RAND" shows
in display.
This function allows the tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Tap the MEMORY Button on main unit or MEM. Button on remote control, the program
number "1" shows in display, "PROG" icon and CD track number "- -" also flashing in the LCD
display. (Note: "1 --" will be in the display if you are programming first time).
or
2. Use the
track number will be shown in display.
3. Tap the MEMORY Button on main unit or MEM. Button on remote control to store the
selected track in the memory, the next program number will advance one (i.e."2") in LCD
display.
button for opening and closing the CD tray. Do not push
Button on main unit or remote control, PLAY indicator
Button again.
Button. The LCD Display will indicate the correct track
Button.
Repeat 1 Repeat All
PLAY TRACK SEQUENCE PROGRAMMING
Button on main unit or remote control to select the desired track. The
Button on main unit or remote control. The
or SKIP PREVIOUS
o r
Button to search within the current track with
Random
E-13
o r
Button until the
Button to go to
Normal
shows