InFocus ScreenPlay 7205 Service Manual page 29

Assembly Notes
•
Align the three tabs on the zoom ring with the three holes on the lens barrel. Push the ring onto
the lens barrel. The lens barrel should fit snugly against the collar inside the zoom ring. Rotate
the zoom ring to ensure that the tabs properly engage the holes.
•
Align the three slots on the focus ring with the three alignment pins on the end of the lens barrel.
Press the focus ring into place. Rotate the focus ring to ensure that the slots properly engage the
alignment pins.
•
Place the lens cap over the focus ring.
SP7205 Service Manual 29