InFocus ScreenPlay 7205 Service Manual page 25
Hide thumbs
Also See for ScreenPlay 7205:
- User manual (45 pages) ,
- Benutzerhandbuch (41 pages) ,
- Key specs (1 page)
Table of Contents
Advertisement
3
Remove the four M3x8 Torx screws that fasten the optical engine to the mounting bracket.
4
Grasp the engine around the projection lens barrel. Then lift the engine up out of the case.
5
Place the engine on a static-free surface or in an ESD-protected container.
Assembly Note
•
Make sure the engine aligns with the holes in the mounting bracket. Torque all five of the M3x8
Torx screws to 6 in/lbs (.68 Nm).
SP7205 Service Manual
25
Advertisement
Table of Contents
