After turning the radio on, turn the Volume knob
Changing the
clockwise to increase the volume; turn it counter-
volume
clockwise to decrease the volume.
– Tune the radio to the channel you want to
– Press and hold the PTT button.
Transmitting
– Hold the microphone about 2 inches away from
– Release the PTT button to listen for a response.
Press SCAN in CB mode; the radio scans the
Scanning
channels, stopping when it receives a transmission.
channels
Press SCAN again to stop scanning
Press and hold
Lock keys
icon displays. Only PTT, LIGHT, and LOCK keys
and the VOLUME and SQUELCH knobs are active.
to prevent
accidental
With Key Lock activated, press and hold
activation.
deactiate key lock; the Lock icon goes away and all
keys are now active.
Press
Turn backlight
seconds. Press it again while the backlight is on to
on and off
turn it off.
NOTE: Make sure you have read and understood part 95 of the
FCC rules and regulations before using the transmitter.
CB OPERATION
CB Communication Codes
The "10" code allows you to communicate easier in noisy
environments. The following table lists some of the most common
codes and their meaning.
transmit on, and listen to make sure the channel
is clear.
your mouth and speak in a normal voice.
to turn the LCD backlight on for 10
14
to actiate key lock; the Lock
to