Charge The Radio; Low Power Indication; Connecting External Speaker - Uniden PRO501HH Manual

Handheld cb radio

Hide thumbs Also See for PRO501HH:

Table of Contents

Available languages

Close battery cover.

Charge the Radio

NiMH rechargeable batteries are not fully charged when first installed

in the radio. After installing the rechargeable NiMH batteries for the first

time, place the radio in the charge adapter. Let it charge for about 12

hours or until the LED on the charge adapter turns green.

Regardless of which type of batteries you use in this radio, the battery

icon flashes when power is low. Replace the alkaline batteries or

recharge the unit if using the rechargeable NiMH batteries.

The battery icon shows a

Connect the DC power cable to a power source and to the radio to

continue to use it until you can recharge/replace the batteries.

Your radio supports an external speaker for remote

external speaker is sold separately.

EXTERNAL SPEAKER

Function

Remote receiver monitoring or substitution for internal

speaker

Impedance

8 Ohms

Rating

1 Watt

Connect to

EXT.SP. jack (⅛-in/3.5 mm)

reduced power level

and its outline flashes.

monitoring.

The

Table of Contents

Table of Contents