Installing A Bts3902E On A Pole With The Diameter Of 114 Mm To 400 Mm (4.49 In. To 15.75 In.); Figure 7-6 Installing The Bts3902E On The Main Mounting Bracket - Huawei BTS3902E WCDMA Installation Manual
Hide thumbs
Also See for BTS3902E WCDMA:
- Hardware description (68 pages) ,
- Product description (21 pages)
Table of Contents
Advertisement
BTS3902E WCDMA
Installation Guide
Figure 7-6 Installing the BTS3902E on the main mounting bracket
----End
7.3 Installing a BTS3902E on a Pole with the Diameter of 114
mm to 400 mm (4.49 in. to 15.75 in.)
This section describes the procedure and precautions for installing a BTS3902E on a pole with
the diameter of 114 mm to 400 mm (4.49 in. to 15.75 in.).
Procedure
Step 1 Install two adapting plates on the top and bottom of the main mounting bracket. Tighten two
M6x14 screws to 4.8 N·m (42.48 lbf·in.) to secure each of the plate, as shown in
Issue Draft A (2011-06-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing a BTS3902E
Figure
7-7.
7-5
Advertisement
Table of Contents
