Bts3902E Indicators; Table 3-2 Bts3902E Indicators - Huawei BTS3902E WCDMA Installation Manual

BTS3902E WCDMA
Installation Guide
Item
Indicators

3.3 BTS3902E Indicators

A BTS3902E has six indicators, which indicate the running status of the BTS3902E.
For details about the indicator positions on the BTS3902E panel, see BTS3902E Ports.
Table 3-2

Table 3-2 BTS3902E indicators

Indicator
RUN
ALM
ACT
Issue Draft A (2011-06-30)
Label
RUN
ALM
ACT
VSWR
O/E
O
describes BTS3902E indicators.
Color Status
Green Steady on
Off
Blinking (on for
1s and off for 1s)
Blinking (on for
0.125s and off for
0.125s)
Red Steady on
Blinking (on for
1s and off for 1s)
Off
Green Steady on
Blinking (on for
1s and off for 1s)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Information About the Installation
Description
For details, see BTS3902E Indicators.
Description
There is power supply, but the BTS3902E is
faulty.
There is no power supply, or the BTS3902E
is faulty.
The BTS3902E is working properly.
Software is being loaded to the BTS3902E,
or the BTS3902E is not started.
Alarms are generated, and the BTS3902E
must be replaced.
Alarms are generated. The alarms may be
caused by the faults on the related boards or
ports. Therefore, the necessity for
BTS3902E replacement is uncertain.
No alarm is generated.
The BTS3902E is working properly with TX
channels enabled.
The BTS3902E is working properly with TX
channels disabled.
3-5