Use The Extender With Mac Filtering Or Access Control - NETGEAR EX5000 User Manual

Use the Extender with MAC Filtering or
Access Control
When the WiFi device connects through the extender to your router, the MAC address
of the wireless device that is shown on the router is translated to another MAC address.
If your router's MAC filter, wireless access control, or ACL is enabled, the WiFi device
connects to the extender but cannot get an IP address from the extender and cannot
access the Internet. To allow the wireless device to receive an IP address from the
extender and access the Internet, you must provide the translated MAC address to the
router.
To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, wireless access control, or ACL.
For more information about how to disable your router's MAC filter, wireless access
control, or ACL, see your router's documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Launch a web browser from a computer or mobile device that is connected to your
extender network.
4. Log in to your extender:
• If your extender and router use different WiFi network names (SSIDs), enter
www.mywifiext.net.
• If your extender and router use the same WiFi network name (SSID), enter
http://<extender's IP address> (for example, http://192.168.1.3).
For more information about how to find your extender's IP address, see Find
Extender's IP Address on page 44.
A login page displays.
5. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
6.
If your browser displays the Menu icon
The extender menu displays.
7. Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and virtual MAC
addresses for computers and WiFi devices that are connected to the extender
network.
Extender Network Settings
AC1200 WiFi Range Extender
, click it.
39 User Manual