Set Up The Extender To Use A Static Ip Address - NETGEAR EX5000 User Manual

8. Click the SAVE button.
Your settings are saved.
Set Up the Extender to Use a Static IP
Address
The extender comes set up to use a dynamic IP address, which is the correct setting for
most home networks.
To set up the extender to use a static IP address:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If your extender and router use different WiFi network names (SSIDs), enter
www.mywifiext.net.
• If your extender and router use the same WiFi network name (SSID), enter
http://<extender's IP address> (for example, http://192.168.1.3).
For more information about how to find your extender's IP address, see Find
Extender's IP Address on page 44.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon
The extender menu displays.
5. Select Settings > Wireless Settings.
The WiFi Settings page displays.
6. Scroll down and click the IP Address heading.
The page expands.
By default, the Dynamically get IP Address from Router radio button is selected.
7. Select the Use Static IP Address radio button.
8. Complete the fields to specify the IP network IP addresses.
9. Click the SAVE button.
Your settings are saved.
Extender Network Settings
AC1200 WiFi Range Extender
, click it.
38 User Manual