Epson PowerLite 450W User Manual page 78

Using the Projector on a Network
78
To enter numbers, use the arrow buttons on the remote
control to select each number on the screen, then press the
button. When you're finished entering an address in
Enter
the network menu, highlight
button.
10. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
11. When you're done making all necessary changes, select
and press the
Enter
again to confirm.
Enter
Press to exit the menu system.
Menu
, then press the
Finish
setting to .
Off
button to save your settings. Then press
Enter
Complete