Epson PowerLite 450W User Manual page 77

5. Press the button on the remote control, select the
Menu
menu, then press
Network
6. Choose
Network Configuration
7. Select the
Wired LAN
8. Choose
IP Settings
following:
9. Do one of the following:
If your network assigns addresses automatically, turn on the
■
setting.
DHCP
If your network does not assign addresses automatically, turn
■
off and enter the projector's
DHCP
, and
Mask Gateway Address
.
Enter
and press
menu and press
Enter
and press . You see a screen like the
Enter
IP Address
, as needed.
.
Enter
.
,
Subnet
Using the Projector on a Network
77