Installing the Software
ELP
Windows 3.x
l
Windows 95
l
l
Connecting Needed Cables
Before installing the software, make sure the projector is properly
connected to your computer. See Chapter
instructions about how to install the serial and mouse cables needed to
use the Link II software.
Installing the Software from Windows 3.x
Perform the following steps to set up the software for Windows 3.x.
1.
4
Using the ELP Link II Software
l
Link II software can be used with the following operating systems:
Macintosh OS System 7.
Insert the Link II for Windows installation diskette into a diskette
drive (A: or B: as appropriate).
1,
"Installation," for