Safety Instructions - Epson PowerLite 5000 User Manual

Safety Instructions

Follow these safety instructions when setting up and using the
projector:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Introduction
Do not place the projector on an unstable cart, stand, or table
Do not use the projector near water or sources of heat.
Use attachments only as recommended.
Use the type of power source indicated on the projector. If you are
not sure of the power available, consult your dealer or power
company.
Place the projector near a wall outlet where the plug can be easily
unplugged. Placez I ?mprimante p&s d'une prise de contacte oti la
fiche peut e^tre dkbranchke facilement.
Insert the projector's three-wire grounding-type plug into a
properly grounded outlet. If you have a two-prong outlet, contact
an electrician to replace it. Do not hold the plug with wet hands.
Take the following precautions for the plug. Failure to comply
with these precautions could result in sparks or fire.
Do not insert the plug into an outlet with dust present.
Insert the plug firmly into the outlet.
Do not overload wall outlets, extension cords, or integral
convenience receptacles. This can cause fire or electric shock.
Do not place the projector where the cord can be walked on. It
may result in fraying or damage to the plug.