Problems With External Video Equipment - Epson MovieMate 50 User Manual

Subtitles do not appear.
■
The DVD might not include subtitles.
■
Make sure the subtitle language is not set to
You can't change the language on a DVD.
The DVD might not include multiple languages.

Problems with External Video Equipment

No picture appears on the screen.
■
Make sure the equipment is turned on.
■
Press the
■
Press the
■
Make sure you don't have cables connected to more than one video port. You can only
use one connection at a time (see page 21).
You see the message
■
Make sure the equipment is turned on.
■
Make sure your cable(s) are connected correctly (see page 21).
■
Press the
source. Allow a few seconds for MovieMate to sync up.
You see the message
Press the
page 39).
The picture is cut off (too large) or too small.
Press the
The picture is distorted.
■
If you're using an extension cable, electrical interference may affect the signal.
■
Check the solutions on pages 52 and 53.
54
Problem Solving
button on MovieMate or on the remote control.
or button on the external equipment.
Play
.
No Signal
button on MovieMate or the remote control to select the external video
Signal not supported.
button on the remote control and check the
button on the remote control and select the appropriate aspect ratio.
(see page 32).
OFF
Video Signal
setting (see